Valpas Bed Legs
Instructions for installing the Valpas Bed Legs
Last updated
Instructions for installing the Valpas Bed Legs
Last updated
A set of Valpas bed legs comprises of smart legs and basic legs. Smart legs are where the trapping and detection of bed bugs happen. Basic legs are installed as the remaining bed legs.
Double-check that you have all the required materials and tools for installation.
Install one smart leg per sleeper, with a minimum of two smart bed legs per room.
Smart legs are installed in the pillow end of the bed and basic legs as the remaining bed legs. See the pictures below for correct placement.
Install the basic legs at the remaining corners of the bed.
Make sure that the smart leg traps are easily accessible for inspection.
If the bed is positioned in a room corner with two sides against the wall, install the smart leg in the corner facing the room, not the corner against the wall, for easier access.
To attach the legs to the bed frame, use the provided adapter base plate or screw them into the existing threaded sockets on the frame. The pictures below illustrate both methods.
Valpas Smart legs
min. 2 per room and 1 per sleeper
Valpas Basic Legs
Enough to replace the remaining bed legs
Valpas app
Threaded rods
One per leg
Download |