Wall mount (if your beds don't have legs)

This section guides you through the installation of Valpas smart bed legs using the wall mount option, ensuring secure and discreet placement for rooms where a standard bed leg setup is not possible.

Configuring & placement

To install wall-mounted smart bed legs, follow the same steps as for a standard installation. The only difference is the placement: instead of attaching the smart legs to the bed, securely mount them to the wall.

Installing the wall mount to the smart bed leg

To prepare the smart bed legs for installation, attach the wall mounts provided with the product. Secure each plastic piece to a leg using the accompanying stud. This ensures the legs are properly assembled and ready for installation.

Before completing the installation, make sure the cassette can be easily removed from the smart bed leg. This ensures easy access for future maintenance and proper functioning of the Valpas technology.

Secure the wooden mounting piece to the wall

To attach the wooden connector piece to the wall, use screws or double-sided tape.

To ensure the correct height, use the smart leg with the wall mount extension piece as a guide. Place it against the wall, measure and mark the position, and then secure the wooden piece.

This guarantees proper alignment for the smart bed legs to function as intended.

Mount each smart legs to wall

Use the wall mount extension piece to attach each smart leg securely to the wooden piece on the wall.