Valpas Smart Bed Legs

Instructions for installing the Valpas Bed Legs

A set of Valpas bed legs comprises of smart legs and basic legs. Smart legs are where the trapping and detection of bed bugs happen. Basic legs are installed as the remaining bed legs.

Prepare

Double-check that you have all the required materials and tools for installation.

Valpas Smart legs

min. 2 per room and 1 per sleeper

Valpas Basic Legs

Enough to replace the remaining bed legs

Valpas app

Download iPhone | Android

Threaded rods

One per leg

Configure the Smart Legs

Install one smart leg per sleeper, with a minimum of two smart bed legs per room.

Configuring smart legs with Valpas app

Attaching the legs

Smart legs are installed in the pillow end of the bed and basic legs as the remaining bed legs. See the pictures below for correct placement.

Install the basic legs at the remaining corners of the bed.

Make sure that the smart leg traps are easily accessible for inspection.

If the bed is positioned in a room corner with two sides against the wall, install the smart leg in the corner facing the room, not the corner against the wall, for easier access.

To attach the legs to the bed frame, use the provided adapter base plate or screw them into the existing threaded sockets on the frame. The pictures below illustrate both methods.

Attaching to existing threaded sockets

Attaching with adapter base plate