This guide walks you through the process of configuring Valpas smart bed legs using the Valpas app. Please follow each step carefully to ensure proper installation and room protection.
Last updated
Open the Valpas app If you don’t have the Valpas app yet, follow the instructions under Mobile app download.
Enter installation mode
Tap the Profile icon in the app.
In the profile menu, select Installation mode to begin the configuration process.
Add a room Tap the “+” button in the bottom right corner of the screen to add a new room.
Name the room Enter the name of the room where you’re currently installing the Valpas smart bed legs.
Gently remove the cassette from the smart bed leg you’re installing. To do this, push the module out of the leg.
Follow the instructions in the app to pair the smart bed leg with the room.
Follow the in-app instructions to configure the smart bed legs. The app will guide you step by step, helping you connect and assign each smart leg to the room you named in Step 2.
Carefully remove the battery strip from the cassette to activate the module.
Place the cassette back inside the smart leg. Ensure it is securely placed inside.
Observe the cassette; a flashing red light indicates that the Valpas Smart Leg is installed correctly.
If the Red Light Stays On or doesn't blink:
Remove the module from the leg and reinstall it.
Repeat this process until you see the red light start blinking. A blinking red light confirms the installation is successful.
Your Valpas Smart Legs are now installed and ready for use. If you encounter any issues contact Valpas support.
