Valpas SafeSleep bed legs

Instructions for installing the Valpas Bed Legs

A Valpas-certified guest room combines SafeSleep bed legs and NoClimb bed legs for complete protection.

The SafeSleep bed legs stops bed bugs discreetly at first contact, using a patented design that draws them in before they can reach the bed.

The NoClimb bed legs complete the setup, ensuring every bed remains stable and fully protected—without chemicals or disruption to your guests.

Step 1: Get prepared

Make sure that you have all the required materials and tools for installation.

Valpas SafeSleep bed legs

min. 2 per room and 1 per sleeper

Valpas NoClimb bed legs

Enough to replace the remaining bed legs

Valpas mobile app

Download iPhone | Android

Threaded rods

One per leg

Step 2: Configure the SafeSleep bed legs

Install one SafeSleep bed leg per sleeper at the head of the bed, with a minimum of two SafeSleep bed legs per room.

Configuring SafeSleep bed legs with the Valpas mobile app

Step 3: Attaching the SafeSleep bed legs to the bed

SafeSleep bed legs are installed in the pillow end of the bed and NoClimb bed legs as the remaining bed legs. See the pictures below for correct placement.

Install the NoClimb bed legs at the remaining corners of the bed.

Make sure that the SafeSleep bed leg traps are easily accessible for inspection.

If the bed is positioned in a room corner with two sides against the wall, install the SafeSleep bed leg in the corner facing the room, not the corner against the wall, for easier access.

To attach the legs to the bed frame, use the provided adapter base plate or screw them into the existing threaded sockets on the frame. The pictures below illustrate both methods.

Attaching to existing threaded sockets

Attaching with adapter base plate